Pilz PMCtendo DD5.03/000/0/0/0/110-230VAC - Manual (Page 163)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-7
7.2 Commissioning the servo amplifier
7 Commissioning
2. Change the entries for the mains voltage and servo amplifier.
If necessary, you can change the following fields, for example:
– Name : Identification for servo amplifier
– Maximum mains voltage : 115 V, 230 V, 400 V or 480 V
][Inbetrieb_Parametrieren_zweiphasig
][Inbetrieb_Parametrieren_2
Select motor from motor database
1. Select
Tools -> Motor Database…
The Pilz Motor Database window appears.
2. Enter the motor's type code.
You'll find the type code on the motor's type plate. Make your entries
using buttons (1) or (2).
Example: PMCtendo AC2.32/0/M/X/X/X/H/6
Fig. 7-2: Enter the motor's type code
INFORMATION
With 2-phase operation, "No message" must be entered under
An input phase is missing . If not, the servo amplifier will regis-
ter errors or warnings.
(1)
H 400 V
M 230 V
(2)
1
2
3
4