Pilz PMCtendo DD5.03/000/0/0/0/110-230VAC - Manual (Page 110)

6.6 Power element
6 Wiring
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-20
6.6.4 Intermediate circuit
Intermediate circuit 6- ][Verdr_Leiterquerschnitte_Verweis
Under “Connection cables”, please note the requirements for the:
 Cable cross sections
 Insulation material
][Verdr_Zwischenkreis_DD5
The connections for the intermediate circuit are
 Not short circuit and earth fault proof
 Not reverse polarity protected.
][Verdr_Leiterquerschnitte_Zusatz
Connector pin assignment
Connector X8 Pin Designation Description
1 -DC Intermediate circuit voltage -DC
3 +Rbext/+DC Intermediate circuit voltage +DC
Connection
Output/input circuit Intermediate circuit
Cable runs ≤ 200 mm:
Use unshielded single wires (2.5
mm²)
Cable lengths > 200 mm:
Use shielded cables.
X8
1 -DC
3 +RBext
4 +RBint
5 -RB
2 n.c.
1
RBext/+DC
3
Servo Drive X8
-DC
Servo Drive X8
1
3
Servo Drive
RBext/+DC
-DC