3 safety, Intended use, 1 hazard analysis – Pilz PMCtendo DD5.03/000/0/0/0/110-230VAC User Manual
Page 19: 2 electrical data, 3 environmental conditions, 3safety, 1 intended use
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1
Intended use
3
Safety
33000
Safety
Safety
3-
3.1
Intended use
3100
Intended use
3-
Sicherheit_Bestimmung_DD5
The servo amplifiers PMCtendo DD5 are designed to drive suitable
brushless, synchronous servo motors and asynchronous motors with
speed, torque and/or position control.
][Sicherheit_Bestimmung_Ausschluss
The following is deemed improper use:
Any component, technical or electrical modification to the servo am-
plifier
Use of the servo amplifier outside the areas described in this manual
Use of the servo amplifier outside the documented technical details
(see chapter entitled “Technical Details”)
Intended use includes making the installation and wiring EMC-compli-
ant. Please refer to the guidelines stated in this manual.
3.1.1
Hazard analysis
Hazard analysis
3-
][Sicherheit_Bestimmung_Gefahrenanalyse
The machine manufacturer must produce a hazard analysis for the ma-
chine. He must take appropriate measures to ensure that unexpected
movements do not lead to hazardous situations for either people or
equipment.
3.1.2
Electrical data
Electrical data
3-
][Sicherheit_Bestimmung_elektrisch_protego_D
Please note the electrical requirements stated in the chapters entitled
“Technical Details”, “Wiring” and “Function Description”.
3.1.3
Environmental conditions
Environmental conditions
3-
][Sicherheit_Bestimmung_Umgebung
Please note the following conditions for using the servo amplifier:
Operation of the servo amplifier is forbidden in the following condi-
tions:
– Potentially explosive areas
– Environments containing corrosive and/or conductive acids, alka-
line solutions, oils, fumes or dusts
– Where there is a direct connection to unearthed or asymmetrically
earthed mains supplies with U
N
> 240 V. See chapter entitled “Wir-
ing”, section on “Mains voltage”.
– On s
hips and o
ffshore installations