Bio-Rad ChromLab™ Software - Manual (Page 184)

6 | Creating a Method
182 | NGC Chromatography Systems and ChromLab Software
 Column — test up to five column types for each column-switching valve in
use. This parameter requires at least one column-switching valve in the
fluidic scheme.
Note: Pages 2 and 3 of the scouting wizard differ when scouting for
columns and samples. See Using the Scouting Wizard to Scout Columns
on page 185 or Using the Scouting Wizard to Scout Samples on page 187
for more information.
 Sample — test up to seven different samples when one sample inlet valve
is used or up to 14 different samples when two sample inlet valves are
used (Port 8 is reserved for wash). This parameter requires at least one
sample inlet valve in the fluidic scheme.
Tip: This option is available if, in the Sample Application phase, you
chose to load the loop through the sample pump or inject sample directly
onto the column. It is not available if you chose to load the loop manually.
Page 2: Select Method Steps to Scout
On this page you select the method steps to be scouted. The method steps that
include the parameter you selected on Page 1 of the scouting wizard are shown.