Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 81)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM CONFIGURATION / 73
7. To change the valve position, press the Increment or Decrement
buttons repeatedly until the desired minimum or maximum output value
is reached.
8. Press the Start button and the valve calibration will immediately begin.
The calibration will run using the new max flow value.
SPREADER CALIBRATION- GRAN SEED AND
GRAN FERTILIZER
The Spreader Constant Calibration screen performs a catch test to
determine the spreader constant. This button is only available for granular
seed and fertilizer applications.
Press the Spreader Calibration button to access the Spreader
Calibration screen.
Figure 46
Spreader Constant Calibration Screen
When the START key is engaged, the machine will become
operational. All necessary precautions must be taken to ensure
user safety. Failure to practice all necessary caution may result in
serious injury or death.
Hoppers must contain material. Be prepared to catch the material
in a container so it can be weighed at the end of the calibration.