Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 132)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
124 / SYSTEM CONFIGURATION
RETURN SYSTEM ACTIVE DELAY
Setting a time delay (seconds) in the Return System Active Delay input box
will trigger the IntelliAg Main Work screen to automatically return as the
active screen view when other system application screens are used, i.e.,
Task Controller or Autopilot.
The delay time starts when the master switch is turned ON and the
implement is in a down position. Delay time will not start unless both of
these conditions are met.
IMPORTANT: This feature only operates with DICKEY-john virtual
terminals.