Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 42)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
34 / SYSTEM CONFIGURATION
MATERIAL SETUP
Up to 16 different materials can be configured for Planter, Liquid, Granular
Seeding, Granular Fertilizer, Granular Fertilizer/Seed Monitor, RPM,
Monitor Only, or Split Air Regulation control.
At the Control Setup screen:
1. Select a material by pressing one of the Material 1 through 16 buttons
to display the Material Setup screen.
Figure 23
Control Setup Screen
CREATE A MATERIAL NAME
Each material name can be customized to accurately define the material’s
type. Creating a name allows for quick identification at the Control Setup
screen and will display throughout various screens to identify the active
material assigned to a channel.
To Edit the Material Name:
1. At the Material Setup screen, press the Material Name Input box as
shown in ( Figure 24 ) to display the virtual keypad.
2. Type in a material name and press the checkmark to save or the ‘X’ to
cancel. Available characters are a combination of upper case,
numbers, letters, symbols, and spaces.