Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 139)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
DATA ITEMS / 131
SEED/DISTANCE MIN ROW
Seed/Distance Min Row displays the seeding row with the minimum
number of seeds per foot (meter). The value to the left side displays the
current row number. The value on the right is the seeds per distance data.
This Data Item displays on an entire row of the Work screen.
SEED/DISTANCE MAX ROW
Seed/Distance Max Row displays the seeding row with the maximum
number of seeds per foot (meter). The value to the left side displays the
current row number. The value on the right is the seeds per distance data.
This Data Item displays on an entire row of the Work screen.
SEED/DISTANCE AVERAGE
Seed/Distance Average displays the average number of seeds per foot
(meter) of all active seeding rows per channel.
NOTE: All Data Items are selected
from the Work Configuration
screen. Refer to the Work
Screen Configuration section
for setup instructions.
SINGULATION AVERAGE
Singulation Average displays the average percent seed singulation of the
planter’s rows that are configured for population. Singulation refers to the
portion of seeds planted individually, rather than in groups.
NOTE: Singulation information is only
operable when using a Smart
Harness system and Seed
Smart sensors. Contact
DICKEY-john Technical
Support at 1-800-637-3302 for
additional information.
SINGULATION ROW SCAN
Singulation Row Scan displays the percent singulation of each of the
planter’s rows. The displayed row increments every four seconds. After the
last row is displayed, the scan will re-sequence beginning with the first
active row.
SINGULATION MIN MAX SCAN
Singulation Min Max Scan alternates the display of the minimum row
singulation and maximum row singulation every two seconds. When a
minimum row displays, the corresponding symbol is shown with the row
number.
0 . 0
ft
S
ft
S 1
0 . 0
FT
S
1
FT
S
0 . 0 SFT
0 %
1 0 %
1 0 %
+