Operator’s manual, Pressure sensor setup – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual
Page 119
OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM CONFIGURATION / 111
PRESSURE SENSOR SETUP
The Pressure Sensor Setup screen controls the parameters for each
pressure sensor:
• Sensor type
• High alarm
• Low alarm
• High alarm delay
• Low alarm delay
• Pressure filter
1. Press the Pressure Setup button to access the Pressure Setup
screen.
Figure 69
Pressure Setup Screen
NOTE: The Auto Config button will
detect the presence of a
pressure sensor and
automatically configures and
populates into the Accessory
Assignment screen.
HIGH ALARM
The High Alarm option sets the pressure value at which a high pressure
warning error is generated. The value is entered in seconds
.
LOW ALARM
The Low Alarm option sets the pressure value at which a low pressure
warning error is generated. The value is entered in seconds.
HIGH ALARM DELAY
The High Alarm Delay establishes the delay between the detection of a high
pressure alarm condition and the resulting alarm display. The value is
entered in seconds.