beautypg.com

Operator’s manual – Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 User Manual

Page 120

background image

OPERATOR’S MANUAL

IntelliAg PDC User 2 & 3

11001-1501-200811

112 / SYSTEM CONFIGURATION

LOW ALARM DELAY

The Low Alarm Delay establishes the delay between the detection of a low
pressure alarm condition and the resulting alarm display. The value is
entered in seconds.

PRESSURE FILTER

The Pressure Filter value filters the signal out of the pressure sensor.
Typically no filtering is required and therefore the standard value is set at
0%. If the pressure readout on the Main Work screen is oscillating in excess
of 10%, increasing the filter value filters the signal to reduce the oscillation.
For a true pressure value this number should be set to 0%.

This manual is related to the following products: