Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 160)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
152 / SYSTEM OPERATION
Some alarms (such as the Master Switch alarm) require a specific action by
the operator before the alarm condition will cease. In these cases,
instructions are indicated on the alarm display.
Other alarms can be acknowledged by pressing the Alarm Cancel button
of ESC key. Detailed information about the alarm can be accessed by
pressing the Alarm Information button.
ALARM LOG
The Alarm Log screen provides a list of specific alarms that have been
issued during system operation. Information displayed on the Alarm Log
screen is informational only and cannot be edited.
Each time specific alarm conditions are detected, it is logged and
communicated to the WSMT.
To View Alarm Log:
1. Press the Alarm Log button to access the Alarm Log screen.
– The number of the alarm, along with the alarm description displays.
– Up to 20 alarms may be recalled.
– Each alarm occurrence can have up to 5 instances of the alarm
tagged with a date and time stamp.
2. To select specific Alarm details, press the Previous or Next buttons to
move the small display arrow next to the desired alarm number.
3. Press the Alarm Detail button to view all of the occurrences of the
selected alarm.
– The down arrow in the lower left at screen bottom signifies that
more alarms are present and accessible by pressing the Previous
or Next buttons.