Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 47)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM CONFIGURATION / 39
SEEDS PER REV
Seeds Per Rev displays the number of seeds that are dropped in one
revolution of the seed disk.
DISC HIGH LIMIT
Disc High Limit establishes the maximum RPM at which the seed disc will
operate. The control will not allow the seed disc to rotate faster than the
Disc High Limit setting.
DISC LOW LIMIT
Disc Low Limit establishes the minimum RPM at which the seed disc will
operate. The control will not allow the seed disc to rotate slower than the
Disc Low Limit setting.
PROD LEVEL ALARM
The Product Level alarm sets the level to trigger an alarm alerting of low
product levels. The entered value is an estimate volume.
Figure 29
Planter Control Setup Screen - Preset Method Disabled
HIGH AND LOW POPULATION ALARM
The High and Low Alarm option sets the high and low population limit
values. The limit can be set to 0.0 to disable the population alarms. The
entered value is dependent on the target rate.
– The High and Low Alarms are entered as a percentage. The
percentage value is referenced in relation to the current channel
target rate setting if rows are assigned to a channel. Otherwise the
alarm will trigger from planter average population.