Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 130)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
122 / SYSTEM CONFIGURATION
NO MASTER SWITCH ASSIGNED
When the No master switch icon is pressed, the Virtual Terminal assigns a
master switch button to function as the auxiliary on and off keys.
The Main Work screen will display with a Control ON button at the top of
the screen.
Toggling between the Control ON and OFF button cycles the system
control on and off.
Figure 79
Main Work Screen with VT Master Switch Configured
IMPORTANT: As a safeguard, when the Control ON button is pressed,
a Master Switch Button Activation alarm must be
acknowledged before equipment operates. This alarm
occurs the first time the Master Switch button is pressed
after every power up.
185