Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 158)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
150 / SYSTEM OPERATION
1. Press the Start button. Seed count data for each sensor will
accumulate when seeds drop through the sensor.
2. Press the Next Rows button to view additional rows.
3. Press the Stop button to stop the seed count function.
4. To reset the seed count on all rows, press the Count Reset button.
5. Press the Work Screen button to exit or press the Accumulators
button to return to the Accumulator screen.
INFORMATION SCREEN
The Information screen displays the module software versions connected to
the system and is typically used for troubleshooting. No information on the
screen can be edited.
Each module connected is identified by module type, module position, and
serial number. Module position cannot be altered on this screen and can
only be established on the Module Configuration screen.
Press the Information button to access the Information screen.
Figure 91
Information Screen
STOP
Software
Version