Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 166)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
158 / TASK CONTROLLER
To transfer WSMT configurations:
1. Verify an SD card is inserted into the VT and all system electronics and
members are connected properly and configured correctly.
2. From the IntelliAg Main Work screen, press the Next Page button to
access the Config button.
EXPORT DATA
1. Press the Export Data input box and enter a file name. File name is
case sensitive and must be exact for the import function to appear.
2. The new data file name will appear in the input box and be saved as
an .xml file extension.
3. Press the Export button.
As files are saved, an hour glass will flash at the top of the screen and
“Exporting Data....” will appear at screen bottom. A successful data
transfer will appear when complete.
4. The Import button will appear after a successful transfer.
Figure 99
Export Data Screen
IMPORT DATA
1. Insert SD card into another Virtual Terminal.
2. Verify all modules and sensors are connected properly and modules
are positioned correctly.
3. At the Import/Export Data screen enter the Import File name to
transfer. File name is case sensitive and must be exact for the import
function to appear.
4. Press the Import button.
As files are transferring, an hour glass will flash and “Import Data
Validation” will appear at screen bottom.
5. Press the Power button to reboot the IntelliAg WSMT.