Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 78)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
70 / SYSTEM CONFIGURATION
Without an Implement Lift Switch
When the Delay Time feature is utilized without an implement lift switch:
• The control channel delays after the master switch has been turned
ON.
• A delay also occurs and then shutdowns the control channel when the
master switch is turned OFF.
Flush Enable
Flush Enable is a manual override mode that opens the valve and
dispenses granular fertilizer, granular seed, or liquid material for a period of
time in relation to a user-defined flush speed. The Flush Enable feature can
only be activated when the tractor is stopped.
To activate Flush Enable:
1. Change Flush Disable to Enable. Flush Enable must be activated
before the Flush Ground Speed feature displays on the Ground Speed
Setup screen.
2. A Flush Ground Speed greater than 0 must be entered on the Ground
Speed setup screen for this feature to operate.