Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 37)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
SYSTEM MODES / 29
SPEED SET
The Speed Set button accesses the Ground Speed Setup screen. Ground
speed is the rate in MPH (Km/h) as measured by the ground speed sensor.
DIAGNOSTICS
The Diagnostics button accesses the Diagnostics screen. Various system
operating parameters display on this screen. There is no user-entered data
on this screen.
ALARM LOG
The Alarm Log button accesses the Alarm Log screen. An account of the
previous alarms issued is stored here. There is no user-entered data on this
screen. Not all alarms are recorded in the alarm log.
SYSTEM ACCUMULATORS
The System Accumulators button accesses the System Accumulators
screen. All of the system accumulators for time and distance display on this
screen. There is no user-entered data on this screen.
MODULE CONFIGURATION
The Module Configuration button accesses the Module Configuration Setup
screen. All user-entered data pertaining to module configuration is
established on this screen.
SCREEN CONFIGURATION
The Screen Configuration button accesses the Screen Configuration Setup
screen. The Virtual Terminal can be customized to display any combination
of data items available. Up to three individual display screens can be
customized. All work screen configurations are established on this screen.
PLANTER OUTPUT MODULE (POM) CONFIGURATION
(OPTIONAL)
The POM Configuration button accesses the POM Setup screen. This
screen is only accessible when using a Planter Output Module for clutch/
frame control.
CONFIGURATION
The Configuration button accesses the Import/Export Configuration screen.
System configurations can be exported to an SD card and imported to other
Working Set Masters eliminating manual data entry.