Great Plains DICKEY-john IntelliAg Planter-Drill Control L3 - Manual (Page 143)

OPERATOR’S MANUAL
IntelliAg PDC User 2 & 3
11001-1501-200811
DATA ITEMS / 135
RPM SCAN
RPM Scan scans through all active shaft/fan sensors sequentially,
displaying the actual RPM measured in four-second intervals. The current
sensor is identified by the number displayed above the RPM symbol.
CHANNEL 1-4 PRODUCT LEVEL
Channels 1-4 Product Levels indicates how much product remains in the
hopper or tank. The Reset button is unique in that it does not reset the value
to zero but allows the user to set the known amount of product added.
Selecting the Reset button thereafter will default to the original amount
entered. To enter the starting product level, select the value and change to
the desired level.
HOPPER LEVEL STATUS SCAN
Hopper Level Status Scan scans through all the hopper level sensors in the
system and indicates an empty or nonempty status.
NOTE: All Data Items are selected
from the Work Configuration
screen. Refer to the Work
Screen Configuration section
for setup instructions.
BOOM STATUS
Boom Status indicates the status of each boom section. The Boom Status
feature is only operational with Liquid Control channels when a
DICKEY-john boom switch module and boom output module are installed
for boom control. This Data Item will scan through 12 sections at a time on
an entire row.
GUIDANCE STATUS
Autopilot Steering Navigation can be engaged and disengaged from the
Main Work screen and displays swath # (AB0), cross-track error (0.00 IN),
age of correction (0.0 SEC), heading direction (360 degrees), and % swath
complete. This Data Item displays on an entire row of the Work screen.
0 . 0
RPM
1
0
LBS
CH1
Reset
1
1 2 3 1
Boom #
Press to engage and
disengage
3