Unitec POS4000/V2 - Manual (Page 91)

POS4000
Document Number: POS4003 83
Document Title: POS4000/V2 Operations Manual
[1] (password 1)
[ENTER]
[MENU UP/DOWN] until "Set Postscript All $" is displayed
[ENTER]
[3]
(select postscript message 3)
[ENTER]
7 Backup Operations (not for use with Autotec)
The POS4000 interface board has a backup mode of operation that provides the
ability to use up to 5 different customer codes that provide repeated access to up
to 4 different wash types. Backup mode should be used in the event that a
POS4000 main console failure prevents use of the normal codes generated and
In order to use a postscript message, you must also define the
postscript messa
Note:
ge (see section 6.7.2)
If a ticket contains more than 1 feature with the same postscript
message assigned to it, the postscript message will only be
printed once. If a ticket contains more than 1 feature with different
postscript messages assigned to them, they will be printed in
ascending order (1-5) regardless of the order the wash functions
were selected.
Note:
The current definition and assignment of postscript messages
is included in the Current Message Configuration Report (see
section 6.7.5).
Note: