Unitec POS4000/V2 - Manual (Page 54)

POS4000
Document Number: POS4003 46
Document Title: POS4000/V2 Operations Manual
Example: If wash prices are $3.00, $4.00, and $5.00,
and the customer enters $3.50 ($3.00 wash is armed)
then selects the refund button, then only the $.50 is
refunded.
Refunding is disabled until the customer has armed a
wash.
2 Change available before wash activated.
This is the same as with mode 1 except that the
refund is available before a wash is activated also.
Note: if the system is prompting the customer to make
a wash selection, refunding will not be available.
6.2.10 External POS MENU->
This sub-menu is used to configure the external Point-of-Sale (POS) capabilities
of your system. It contains the following sub-menu items:
Set POS Offset (direction and amount)
Set EXT. POS Type
Set POS MAX WASHES (for special circumstances only)
Set Send Code age (for certain EXTPOS units only)
Set Reverse order (to allow pumps to have wash 1 most expensive)
Set Default Discounts (See Appendix XIV)
To execute one of the sub-menu commands, first select "External POS MENU->"
from the SYSTEM SETUP menu, and then scroll through the sub-menu until the
command of interest is displayed and then press the [ENTER] key.
Note that with the Optional Remote Extpos Connection Software, the master and
each secondary console can be set to interface to a different External POS
system using different configuration settings.
This command is used to configure an OPTIONAL FEATURE o
Note:
f
the POS4000. If this feature is not present in your system, you will
not be able to execute these commands.