Unitec POS4000/V2 - Manual (Page 63)

POS4000
Document Number: POS4003 55
Document Title: POS4000/V2 Operations Manual
6 . 2 . 1 1 . 3 S e t N u m b e r o f B a y s a n d C o n s o l e s
This command is used to define the number of customer interfaces (carwash
bays) and remote POS4000s that are present at a site. Refer to APPENDIX VII
for additional information.
To select this command, scroll through the Multiple Unit sub-menu until "Set #
Bays/Consoles" appears and then press [ENTER].
Example to setup a controller console to communicate with 2 customer interfaces
and 1 remote POS4000:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[MENU UP/DOWN] until "Multiple Unit MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Set # Bays/Consoles" appears
[ENTER]
[2][ENTER] 2 bays
[1][ENTER] 1 remote console
Do not include the controller POS4000 when counting the
number of Remote POS4000s.
Note:
The default is 1 ba
Note:
y and 0 remote consoles.
When setting up a remote console, # of remote consoles is
always set to 0.
Note: