Unitec POS4000/V2 - Manual (Page 51)

POS4000
Document Number: POS4003 43
Document Title: POS4000/V2 Operations Manual
6.2.9 Cash Upgrades MENU ->
This sub-menu is used to configure the cash upgrade or buy up capabilities of
your system. It contains three sub-menu items:
Set BUYUP Mode
Set Coin/Bill Values
Set Dispense Value
Set Dispense Mode (E-systems 4000 only)
To execute one of the sub-menu commands, first select "Cash Upgrades MENU-
>" from the SYSTEM SETUP menu. Next, scroll through the sub-menu until the
command of interest is displayed and then press the [ENTER] key.
6 . 2 . 9 . 1 S e t B U Y U P M o d e
This command is used to enable or disable buy up capability at the entrance of
the carwash. To select this command, scroll through the Cash Upgrades sub-
menu until "Set BUYUP Mode" appears and then press [ENTER].
There are two buy up modes that are generally available:
0: No upgrade/upgrade capability
1: Automatic by price
In addition for E-systems 4000 units :
2: Forced selection
If your carwash supports other modes, those options will appear as
choices when the command is executed.
Example to disable buy ups:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[MENU UP/DOWN] until "Cash Upgrades MENU ->" appears
[ENTER]
[MENU UP/DOWN] until "Set BUYUP Mode" appears
[ENTER]
[0]
[ENTER]