Unitec POS4000/V2 - Manual (Page 68)

POS4000
Document Number: POS4003 60
Document Title: POS4000/V2 Operations Manual
6.4 Set Prices
This command lets you set the prices for each feature (programs, options and
groups). To select this command, press the [CMD] key followed by the [SET
PRICE] key. Then scroll to the secondary menu item of interest and press the
[ENTER] key. The secondary menu items are as follows:
Set Regular Prices
Set Discount 1 Price
Set Discount 2 Price
Print Pricing Report
To execute one of the secondary commands, scroll through the secondary menu
until the command of interest is displayed, and then press the [ENTER] key.
6.4.1 Set Regular or Discount Prices
Once a price level has been selected (regular, discount 1 or discount 2), the
pricing of all features at that price level can be set. The label and current price of
feature 1 will be displayed. At this point, you should type in the new price and
press [ENTER], the price will be updated and the next feature label and current
price will be displayed. Continue this for each feature. To keep the current price
of a feature, simply press [ENTER] when the current price is displayed.
When entering discount prices, enter the final price to a customer. Do NOT enter
the amount of the discount. If the discount prices are set to zero, they are
considered free.
Each price must be entered as cents followed by the [ENTER] key. For example,
a $2.35 price would be entered as 235 followed by the [ENTER] key. To zero the
price of an item, press the [0] key followed by the [ENTER] key.
Any time the prices are updated, a Current Pricing Report will automatically be
printed. This report shows the current price of every feature at all 3 price levels.
This report can also be generated by selecting the command "Print Pricing
Report" from the secondary menu.
For POS4000 software versions 7.4 and later, the POS4000 will automatically
update pricing at the WSII every time power is cycled to the WSII or
communication is lost between the POS and the WSII for more than 20 seconds.
This requires WSII version 3.10 or later.