Unitec POS4000/V2 - Manual (Page 158)

POS4000
Document Number: POS4003 150
Document Title: POS4000/V2 Operations Manual
7. Set the unit to Operate mode. You should see both the receive light and
the transmit light on the Wash Select II
™ 485 communications module
begin to blink within 10 seconds. They should blink one after the other
with a pause of less than a second between blinking. If you have more
than one bay then the receive light should be on longer than the transmit
light.
8. Set the unit back into setup mode and continue configuring the other
settings.
Appendix Q. APPENDIX XVI - Accounting Report for
Wash Select II POS
This section details the references in the POS4000 report to Sales at the Wash
Select II software. This report will be available at a connecting POS4000 console
when the POS4000 has Wash Select II software installed. To get more detailed
information about the transactions at the Wash Select II, print an accounting
report at the Wash Select II unit or acquire the report over the Remote Reporting
option of the Wash Select II. The POS4000 report does not contain the exact
same information that the Wash Select II report does.
Sample POS4000 Manager/Shift Report when connected to a Wash Select II:
Print Audit Counts
05/30/1991 10:10PM
MANAGER SHIFT
CODE SALES/USAGE and
WASH ACTIVATION SUMMARY
EXPRESS WASH
Regular $ 4.00 13 8
Discnt 1 $ 0.00 0 0
Discnt 2 $ 0.00 0 0
Codes Used 7 3 POS4000 codes used at WSII
Accounts Used 0 0 POS4000 fleet account codes
uses at WSII
---------------
POSCode Only 6 2 Transactions at the WII
that involved only a POS4000
code.
Coinbox Only 5 5 Transactions at the WSII
that involved any form of
payment not including a
POS4000 code (Credit, cash,
token, VIP coupon etc.)
POSCode & Upgrd 0 0 Transactions that involved
both a POS4000 code and some