Unitec POS4000/V2 - Manual (Page 113)

POS4000
Document Number: POS4003 105
Document Title: POS4000/V2 Operations Manual
10.3 Loading and Changing the Paper
Using Paper Roll:
1. Cut the paper at a right angle to its longitudinal centerline as shown in fig. 7.
2. Insert the paper into insertion inlet on the rear side of the printer.
3. Turn on the power switch and feed the paper by pushing the LF switch.
4. When the paper comes out of the clearance (paper cutter part) on the printer
cover, fix the paper by means of paper holder, then set in on the main unit.
endix A.
10.4 Actuating the Print Functions
1. Be sure that a paper role is properly loaded.
2. Confirm that the ribbon cassette is properly installed and turn the power
switch off.