Unitec POS4000/V2 - Manual (Page 53)

POS4000
Document Number: POS4003 45
Document Title: POS4000/V2 Operations Manual
6 . 2 . 9 . 3 S e t D i s p e n s e V a l u e
This command is used to set the value of coins that are dispensed as change by
the AUTOTEC or the E-Systems 4000 at the entrance of the carwash. Unless
your POS4000 main console is used with the Hamilton AutoTec or the Unitec E-
4000, this command will have NO effect upon the operation of your system. To
select this command scroll through the Cash Upgrades sub-menu until "Set
Dispense Value" appears and then press [ENTER].
Example to set the value of dispensed coins as $1.00:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[MENU UP/DOWN] until "Cash Upgrades MENU ->" appears
[ENTER]
[MENU UP/DOWN] until "Set Dispense Value" appears
[ENTER]
[1][0][0]
[ENTER]
6 . 2 . 9 . 4 S e t D i s p e n s e M o d e ( E - S y s t e m 4 0 0 0 o n l y )
This command is used to set criteria for when the E-System 4000 coin box will
dispense change. This function will not affect the change making ability for a
Hamilton Autotec. The dispense modes are defined as follows:
Dispense Mode Description
0 No change available
1 Change available after wash activated
Change is available at the escrowed amount only. If
the amount entered is equal to the value of a wash
(the wash armed) then the amount will not be
refunded. Only the amount between the wash prices
is refunded.
The default value is $0.25.
Note:
Valid values are 25,50,100, and 200.