Unitec POS4000/V2 - Manual (Page 58)

POS4000
Document Number: POS4003 50
Document Title: POS4000/V2 Operations Manual
6 . 2 . 1 0 . 5 R e v e r s e O r d e r
Enabling the Reverse Order function will allow the order of carwashes configured
in the External POS device to be reversed. This function is often used when the
External POS has the prices configured in descending order (wash 1 on
EXTPOS is most expensive). Since the wash prices for a coin box that uses
cash must be in ascending order at the POS4000, this function allows the re-
mapping of the washes requested at the registers and pumps. This function
must be configured w/ POS MAX WASHES to determine how to reverse the
order.
Example:
Carwash is configured w/ 3 washes:
Wash 1 (program 1): Basic $4.00
Wash 2 (program 2): Deluxe $5.00
Wash 3 (program 3): Supreme $6.00
Register is configured to the opposite:
Wash 1 : Supreme $6.00
Wash 2 : Deluxe $5.00
Wash 3 : Basic $4.00
To make the system function properly you must configure POS MAX washes
(See section 6.2.10.3) to a value of 3 (3 washes). Set Reverse order to 1
(enabled).
After changing these values the current EXT POS settings will print out with a
mapping of the Carwash type given vs. the carwash type requested. This will
show the relationship of the mapping.
The default setting is 0, which is normal protocol.
Note:
This feature is for use with POS 1 and 2 onl
Note:
y.