Unitec POS4000/V2 - Manual (Page 44)

POS4000
Document Number: POS4003 36
Document Title: POS4000/V2 Operations Manual
6.2.2 Configuring a Group
If "Groups" are available on the cashier keys, this command can be used to
configure the groups. A group is a car wash package that includes exactly one of
the car wash programs and any combination of options. For example, a "Works"
group might include the deluxe wash program and all options available on the car
wash. This "group" or package would then be available using a single key on the
cashier keypad and would have its own pricing structure and accounting
information. As with all car wash functions, the group washes can be renamed to
match your nomenclature (see section 6.13.1).
To configure a group scroll through the configuration secondary menu until
"Configure a Group" is displayed and then press the [ENTER] key. You will then
be prompted for the group number (i.e.. 1 through 5 if five groups are available).
Enter the number of the group to be configured using the numbers printed on the
management keypad followed by the [ENTER] key (do not use the actual group
key from the cashier keypad).
You will then be prompted to issue the wash type of this group. Issue the desired
wash using the cashier keys as in a normal car wash transaction. For example,
press the [Program 1] key, [Option 1] key, [Option 2] key and then the [ENTER]
key. Once the car wash type is entered, a group ticket will be printed to confirm
your selection. If an invalid set of features is entered, the console will display
"INVALID SELECTION" and wait for a valid set of features to be issued.
Example to set Group 3 to Program 1 and options 1, 2 & 4:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[ENTER]
[MENU UP/DOWN] until "Configure a Group" is displayed
[ENTER]
[3]
(select group #3 to configure)
[ENTER]
A carwash "group" cannot be used as a feature to configure
another
Note:
group, use only specific wash programs and options.