Unitec POS4000/V2 - Manual (Page 28)

POS4000
Document Number: POS4003 20
Document Title: POS4000/V2 Operations Manual
When the code is completely entered and it is determined that the code is not an
account number, that code is shown on the main console display in the lower
right corner. If the code is valid, the wash type is simultaneously issued and
shown on the lower line of the main console display. The issued wash types are
identified on the display as P1, P2..., G1, G2... and O1, O2... for program 1,
program 2 ..., group 1, group 2 ..., option 1, option 2 ... respectively.
If the code is invalid, a buzzer will sound at the main console and at the customer
interface. The number of invalid codes (since the last valid code) will be shown
on the lower line of the main console display. The number of sequential invalid
codes can be used to alert the cashier of tampering at the entrance console.
Additionally, the "re-enter code" relay will be turned on briefly to control a
customer guidance light.
If the car wash is in-use when a valid code is entered, a "Code Accepted/Please
Wait" relay is activated at the interface. This relay remains on until the wash is
available.
5.1 Cash Upgrades (Buy ups) at the Carwash Entrance
As an optional feature, the POS4000 can be configured to allow customers to
purchase a wash or upgrade from a valid code by depositing cash at the
entrance of the wash. This capability requires a quarter acceptor and/or a bill
acceptor be installed at the customer interface and requires the buy up mode to
be enabled. The current buy up mode is included in the System Configuration
Report.