Unitec POS4000/V2 - Manual (Page 153)

POS4000
Document Number: POS4003 145
Document Title: POS4000/V2 Operations Manual
Requested Level Returned Name
1 1 P3 Super Wash
2 1 P2 Deluxe Wash
3 1 P1 Express Wash
4 1 P3 Super Wash
5 1 P2 Deluxe Wash
6 1 P1 Express Wash
7 0 P3 Super Wash
8 0 P2 Deluxe Wash
9 0 P1 Express Wash
10 0 P3 Super Wash
11 0 P2 Deluxe Wash
12 0 P1 Express Wash
Your wash names may differ.
Note:
Appendix O. APPENDIX XIV - Application notes for
using the reverse order function
Even though Wayne programs washes 3-11, the Wayne
re-maps them to washes 1-9 before requesting them
Note:
internally
from the POS4000.
Purpose:
To program a POS4000 system where the Register/Pumps are to be programmed with
wash 1 as the most expensive.
Requirements:
POS4000 must be loaded with Software version 7.10 or higher. POS4000 system must
be set up with wash 1 as the least expensive in order to allow proper cash purchases at
the entry system under all circumstances.
Setup:
This example shows how to configure a 3 wash system at the register/pumps and at the
POS4000. The setting of a 4 wash system is similar to this example.
The following is an example setup:
Acquire version 7.10 or later software for the POS4000 and install into POS4000.
Program the wash prices as follows:
Program key Regular price Discount 1 price
1 $4.00 $2.00
2 $5.00 $3.00