Unitec POS4000/V2 - Manual (Page 61)

POS4000
Document Number: POS4003 53
Document Title: POS4000/V2 Operations Manual
6.2.11 Multiple Unit MENU->
Refer to Appendix VII for multiple unit configuration procedures and
application notes.
This sub-menu is used to configure the multiple customer interface (carwash)
and multiple Point-of-Sale (POS) capabilities of your system. It contains 4 sub-
menu items:
Set Unit Number
Controller/Remote
Set # Bays/Consoles
Prog Remote Consoles
To execute one of the sub-menu commands, first select "Multiple Unit MENU->"
from the SYSTEM SETUP menu, and then scroll through the sub-menu until the
command of interest is displayed and then press the [ENTER] key.
6 . 2 . 1 1 . 1 S e t U n i t N u m b e r
This command is used to set the unit number of the POS4000. Refer to
APPENDIX VII for additional information.
To select this command, scroll through the Multiple Unit sub-menu until "Set Unit
Number" appears and then press [ENTER].
Example to set the unit number of a POS4000 as 3:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[MENU UP/DOWN] until "Multiple Unit MENU->" appears
This command is used to configure an OPTIONAL FEATURE o
Note:
f
the POS4000. If this feature is not present in your system, you will
not be able to execute these commands.