Unitec POS4000/V2 - Manual (Page 48)

POS4000
Document Number: POS4003 40
Document Title: POS4000/V2 Operations Manual
[ENTER]
Example to re-enable all cashier keys:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[ENTER]
[MENU UP/DOWN] until "Disable Cashier Key" is displayed
[ENTER]
[ENTER]
(no cashier keys pressed)
6.2.6 Set Serial Baud Rate
This command allows you to change the serial baud rate of the cash register port
on the console. This rate only needs to be changed if you are connecting to an
External Point of sale device.
To select this command scroll through the configuration secondary menu until
"Set Serial Baud" is displayed and then press the [ENTER] key. You will then be
prompted to enter the new baud rate. Only standard baud rates are allowed:
1200, and 2400, 4800,9600, and 19200. If you enter one of these rates, it will be
saved. If you enter any other rate, an error message is displayed and the baud
rate is not changed.
Cashier keys that have been disabled can not be setup as
described in section 6.13.
Note:
All programs and options not available on your particula
Note:
r
carwash and all group packages not programmed and used by you
must be disabled if the buy up option is enabled.