Unitec POS4000/V2 - Manual (Page 84)

POS4000
Document Number: POS4003 76
Document Title: POS4000/V2 Operations Manual
Example to print 50 most recent valid codes:
[CMD]
[MEMORY]
[1]
(password 1)
[ENTER]
[MENU UP/DOWN] until "Print Valid Codes" appears
[ENTER]
[5][0]
(number of codes you want printed)
[ENTER]
6.10.2 Print Used Codes
This command is the same as the "Print Valid Codes" command except that it
prints the most recently used codes.
6.10.3 Clear ALL Valid Codes
This command cancels all valid customer codes currently in memory. To
execute this command, scroll through the MEMORY secondary menu until "Clear
ALL Valid" appears. Then press [ENTER].
In addition to the password security, this function requires you to confirm the
operation by entering 99. This provides extra security to avoid accidental
deletion of the codes. This command does not delete fleet account codes.
Example to delete all valid codes from memory:
[CMD]
[MEMORY]
[1]
(password 1)
[ENTER]
[MENU UP/DOWN] until "Clear All Valid" is displayed
[ENTER]
[9][9]
(enter 99 to proceed)
[ENTER]
6.10.4 Clear ALL Used Codes
This command is the same as the Clear ALL Valid command except that the
used customer codes are canceled.