Unitec POS4000/V2 User Manual
Page 151
POS4000
Document
Number:
POS4003
143
Document Title:
POS4000/V2 Operations Manual
• Allow the ability to decide if each wash is to be sold at pump or
register only
• Allow the configuration of 6 or more discrete wash types
(depending on the discount levels you need to implement the
register may have to accommodate up to 12 wash types)
POS4000 requires Software Version 7.11 or later
POS4000 must have serial interface set to 1 or 2 (POS1 or POS2)
POS4000 must have POSMAX washes value set to the number of REAL carwashes
POS4000 must have reverse order enabled if first EXTPOS wash is the
most expensive wash
At the time of this software release only the Wayne + with Chevron configuration
was know to operate to the above specifications.
The following example is for a Wayne + system with Chevron software
configuration:
Carwash has 3 real washes.
Wayne carwashes start with the most expensive wash first.
Wayne must be programmed with 9 washes
Wayne washes are to be programmed as follows
(Note: washes 1 and 2 not used. Wayne wash 3 requests Unitec wash 1)
Wash Number Reg Price
Reg PLU
w/ Gas Price w/Gas PLU
3 $7.00
48(not
used)
$5.00
51(at
pumps)
4 $6.00
49(not
used)
$4.00
52(at
pumps)
5 $5.00
50(not
used)
$3.00
53(at
pumps)
6 $5.00
54(c-store
w/gas)
n/a
n/a
7 $4.00
55(c-store
w/gas)
n/a
n/a
8 $3.00
56(c-store
w/gas)
n/a
n/a
9 $7.00
57(c-store
reg
$)
n/a
n/a
10
$6.00
58(c-store
reg
$)
n/a
n/a
11
$5.00
59(c-store
reg
$)
n/a
n/a