Unitec POS4000/V2 - Manual (Page 55)

POS4000
Document Number: POS4003 47
Document Title: POS4000/V2 Operations Manual
6 . 2 . 1 0 . 1 S e t P O S O f f s e t
This command is used to convert an external POS system's wash "type" or
"level" to a POS4000 program or group key. Refer to APPENDIX VI for
additional information.
To select this command, scroll through the External POS sub-menu until "Set
POS Offset" appears and then press [ENTER].
Example to set the POS Offset as 5 UP:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[MENU UP/DOWN] until "External POS MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Set POS Offset" appears
[ENTER]
[1][ENTER] to select direction UP
[5][ENTER] to select amount of offset as 5
This feature is for use with POS 1, 2 and 3.
Note:
The default is for there to be no offset
Note:
(i.e. 0 down).
The current EXT POS settings will print out with a mapping of
the carwash type given vs. the carwash type requested.
Note: