Unitec POS4000/V2 - Manual (Page 49)

POS4000
Document Number: POS4003 41
Document Title: POS4000/V2 Operations Manual
For example, you can set the baud rate to 9600 as follows:
[CMD]
[SYSTEM SETUP]
[MENU UP/DOWN] until "Set Baud Rate" appears
[ENTER]
[9][6][0][0]
[ENTER]
6.2.7 Set Languages
This command allows you to change the language used on the main console
display and/or the customer language (used on tickets and optional customer
display at entrance of wash). To select this command scroll through the system
configuration main menu until "Set Language" appears and then press [ENTER].
Once selected you are prompted to enter the desired console language. Press
[0][ENTER] for English or [1][ENTER] for French. Next, you are prompted to
select the customer language in a similar manner.
Example to set console language as English and the customer language as
German:
[CMD]
[SYSTEM SETUP]
The new Baud Rate will not take effect until a power reset of the
console occurs. To do this, simply turn the ON/OFF switch in the
OFF position for a moment and then return it to the ON position.
Note:
The factory default baud rate is dependent on what type of EXT
POS interface is configured on default. Serial Baud default fo
Note:
r
POS1 & POS2 is 19200, serial baud for POS 0 (No EXT POS
interface) and POS3 is 2400.