Unitec POS4000/V2 - Manual (Page 85)

POS4000
Document Number: POS4003 77
Document Title: POS4000/V2 Operations Manual
6.10.5 Clear Old Codes
This command allows you to cancel valid customer codes that were issued prior
to a specific date. This command is required to enforce the code age warning
(see section 6.2.3) printed at the bottom of a ticket. To select this command,
scroll through the secondary menu until "Clear Old Codes" is displayed. Then
press [ENTER].
Once you have selected this option, you will be prompted for the date to delete
codes prior to in the format MMDDYY (month, day and year each as 2 digits). All
codes issued prior to this date will be deleted. For example: if you enter 050692,
all valid codes issued prior to May 6, 1992 will be marked for deletion. Note 00-
89 = 2000-2089 and 90-99 = 1990-1999.
The console will then prompt you to either cancel only the "0=Free" codes (total
price was "$0.00") or the "1=All" codes. Press [0] then [ENTER] to delete only
free codes or [1] then [ENTER] to delete all codes. Once you have made this
selection, the console will print a report indicating the number of valid codes
currently in memory and the number of codes that will be deleted by your current
request. At this point, you must press [9][9][ENTER] to confirm that you wish to
cancel the codes selected. If you enter any other number or just press [ENTER],
the command will be aborted and no codes will be deleted.
If the console time has been changed recently by one o
WARNING!!
r
more days, unanticipated code cancellations could occur. This
command uses the current date (as set in the POS4000) and the
date codes were issued (also as set in the POS4000) to
determine which codes will be canceled.