Lenze EVF9383 - Manual (Page 241)

Configuration
Function blocks
Internal motor control with V/f characteristic control (MCTRL1)
8
8.2
8.2.6
l
8.2−25 EDSVF9383V EN 7.1−04/2012
8.2.6 Internal motor control with V/f characteristic control (MCTRL1)
The function block MCTRL1 controls the motor. It is always carried out so that
it does not need to be entered into the processing table.
In the Lenze setting, the controller is set to V/f characteristic control
(C0006 = 5). Without other settings and with analog setpoint selection via
X6/1, X6/2 and connected asynchronous standard motor (50 Hz/400 V)
commissioning can be executed immediately.
The V/f characteristic control is suitable for single drives, multi−motor drives,
synchronous motors, reluctance motors and asynchronous motors.
1
0
C0022
C0015
C0036
PWM
MCTRL-N-SET
Imax
MCTRL1
C0906/1
C0050
C0056
±100%
C0890
C0075
C0076
C0023
1
C0090
C0912
C0014
C0025
C0234
C0089
C0905
MCTRL-M-ADD
C0906/2
C0891
C0021
V/f
C0074
-
C0018
C0142
C0148
C0143
QSP
slip compensation
active
current
C0105
MCTRL-N/M-SWT
MCTRL-HI-M-LIM
MCTRL-LO-M-LIM
MCTRL-I-SET
C0906/5
MCTRL-I-LOAD
C0907/4
C0907/2
C0906/3
C0906/4
C0893
C0892
C0899
C0902
C0901
n.c.
n.c.
n.c.
n.c.
n.c.
MCTRL-BOOST
C0906/6
C0903
n.c.
MCTRL-NSET2
MCTRL-MSET2
MCTRL-MMAX
MCTRL-IMAX
MCTRL-DCVOLT
MCTRL-IACT
MCTRL-VACT
MCTRL-FACT
MCTRL-IXT
MCTRL-MACT
C0054
C0053
C0052
C0064
C0058
n.c.
C0089
C0087
C0086
C0909
MCTRL-NACT
MCTRL-PHI-ACT
MCTRL-PHI-ANA
CONST
MCTRL-PHI-ANG
C0051
C0011
Encoder
1
C0025
MCTRL-QSP
C0907/3
C0900
MCTRL-QSP-OUT DCTRL-QSP
C0042
MCTRL-GSB
C0904
C0107
C0019
MCTRL-GSB-OUT
Auto-GSB
KTY
MCTRL-M-TEMP
C0063
C0078
speed control
active
current
C0235
oscillation damping
C0236
C0086
MCTRL-VP-N-ADAPT
C0911
C0910
X8
C0420
X9
C0421
C0071
C0070
1 > –
1 > –
fb_mctrl1_01
Fig. 8.2−15 Internal motor control with V/f characteristic control (MCTRL1)
Description