Lenze EVF9383 - Manual (Page 228)

Configuration
Function blocks
Master frequency output (DFOUT)
8
8.2
8.2.3
l
8.2−12 EDSVF9383V EN 7.1−04/2012
ƒ The input signals at X8 are amplified electrically and output directly.
ƒ The signals depend on the assignment of the input X8.
ƒ The codes C0030, C0545 and the output DFOUT−OUT have no function.
ƒ The zero track is only output if it is connected to X8.
ƒ The input signals at X9 are amplified electrically and output directly.
ƒ The signals depend on the assignment of the input X9.
ƒ The codes C0030, C0545 and the output DFOUT−OUT have no function.
ƒ The zero track is output if it is connected to X9.
Signal at X8 is directly output
at X10
Signal at X9 is directly output
at X10