Festo Электромотор MTR-DCI - Manual (Page 95)

4. The control panel (type MTR-DCI-...-H2 only)
4-21
Festo P.BE-MTR-DCI-DN-EN en 1209a
4.5.5 [Settings] [Password edit]
In order to prevent unauthorised or unintentional overwriting
or modification of parameters in the device, access via the
control panel can be protected by a “local” password. No
password has been preset at the factory (presetting = 000).
• Keep the password for the MTR-DCI in a suitable location,
such as in the internal documentation pack for your
system.
If the active password in the MTR-DCI is lost in spite of care
being taken:
If needed, the password can be deleted by entering a master
password. In this case please contact your Festo Service
partner.
Activating the password
Select [Settings] [Password edit] in the menu.
Enter a password with 3 digits (0..9). The current entry
position is marked with a question mark.
1. Use the arrow keys to select a digit.
2. Confirm your entry with .
3. Set a number for the next input position “?”.
4. After selecting the third digit, save the password with
SAVE .
After saving the password, access to all parameterisation and
control functions in the control panel is locked by a pass-
word query.
New Password:
[?xx] =
ESC
EDIT <--> OK