Festo Электромотор MTR-DCI - Manual (Page 79)

4. The control panel (type MTR-DCI-...-H2 only)
4-5
Festo P.BE-MTR-DCI-DN-EN en 1209a
Function Button
MENU Activates the main menu from the status display.
Menu
ESC Rejects the current entry and switches back in stages to the higher menu
level or status display.
EMERG.STOP Interrupts the current positioning procedure ( > Error mode; confirm
with , then automatic return to the status display). Only when HMI
= on!
OK Confirms the current selection or entry.
Enter
SAVE Saves parameter settings permanently in the EEPROM.
START/STOP Starts or stops a positioning procedure (only in Demo mode).
After stop: display of current position; use
<- -> Scrolls within a menu level in order to select a menu command.
v
V
EDIT Sets parameters.
Tab. 4/1: Button function (overview)