Festo Электромотор MTR-DCI - Manual (Page 295)

C. The Command Interpreter (CI)
C-21
Festo P.BE-MTR-DCI-DN-EN en 1209a
Scaling
CI 20D0h 01h, 02h Array uint8 rw/ro
Description Settings for the HMI control panel (for MTR-DCI-...-H2 only)
Only affects the values in the display: All parameters are stored in increments.
Measuring Unit 20D0h 01h uint8 rw
Defines a system of measurement for the control panel.
1 (0x01): metric units of measurement (mm, mm/s, mm/s
2 )
4 (0x04): angular degrees
8 (0x08): revolutions
See PNU126/20FFh.
Scaling Factor 20D0h 02h uint8 ro
Number of decimal places. Fixed = 2. See PNU126/20FFh.