Festo Электромотор MTR-DCI - Manual (Page 226)

B. Reference – Festo DeviceNet and FHPP
B-4
Festo P.BE-MTR-DCI-DN-EN en 1209a
B.1.2 Object overview (class, attribute, instance)
The object model is used for data access via “Explicit Mess-
aging” over DeviceNet. The following tables contain all
defined parameters and specify the class (CLS), attribute
(ATTR) and instance (INST). For data addressing via the FPC
(within the cyclic I/O data), the FHPP parameter number/
sub-addressing is used.
The descriptions of the parameters can be found under the
specified FHPP parameter number PNU, in sections B.2.4 to
B.2.19.
Device Data FHPP
Class 100 (0x64) CLS INST ATTR PNU SI See
Manufacturer Hardware Version 64h 01h 01h 100 — B.2.4
Manufacturer Firmware Version 64h 01h 02h 101 — B.2.4
Version FHPP 64h 01h 03h 102 — B.2.4
Controller Serial Number 64h 01h 08h 114 — B.2.4
Manufacturer Device Name 64h 01h 09h 120 — B.2.5
User Device Name 64h 01h 1Ah 121 — B.2.5
Drive Manufacturer 64h 01h 1Bh 122 — B.2.5
HTTP Drive Catalogue Address 64h 01h 1Ch 123 — B.2.5
Festo Order Number 64h 01h 1Dh 124 — B.2.5
Device Control 64h 01h 1Eh 125 — B.2.5
HMI Control – LCD Voltage 64h 01h 1Fh 126 1 B.2.5
– LCD Contrast 64h 01h 10h 126 2 B.2.5
– Unity 64h 01h 11h 126 3 B.2.5
– Scale 64h 01h 12h 126 4 B.2.5
Keypad Status 64h 01h 13h 306 — B.2.7