Festo Электромотор MTR-DCI User Manual
Page 178
5. Commissioning
5-80
Festo P.BE-MTR-DCI-DN-EN en 1209a
Fault numbers
Description
0
0x00
Invalid PNU. The parameter does not exist.
1
0x01
Parameter value cannot be modified (read only)
(2)
0x02
– (Reserved – lower or upper limit value exceeded)
1)
3
0x03
Faulty subindex
4
0x04
No array
5
0x05
Incorrect data type
(6)
0x06
– (Reserved – setting not permitted – can only be reset)
1)
(7)
0x07
– (Reserved – description element cannot be modified)
1)
(8)
0x08
– (Reserved – PPO-Write requested in IR does not exist)
1)
9
0x09
Description data does not exist
(10)
0x10
– (Reserved – access group incorrect)
1)
11
0x0A
No higher-order
(12)
0x0B
– (Reserved – password incorrect)
1)
13
0x0C
Text cannot be read in cyclical exchange
(14)
0x0D
– (Reserved – name cannot be read in cyclical exchange)
1)
(15)
0x0E
– (Reserved – text array does not exist)
1)
(16)
0x10
– (Reserved – PPO-Write missing)
1)
(17)
0x11
– (Reserved – request cannot be processed because of operating status)
1)
(18)
0x12
– (Reserved – other faults)
1)
(19)
0x13
– (Reserved – data cannot be read in cyclical exchange)
1)
(20)
0x14
– (Reserved – invalid value)
1)
(21)
0x15
– (Reserved – response too long)
1)
22
0x16
Invalid: attributes, number of elements, PNU or IND
(23)
0x17
– (Reserved – write request: invalid format)
1)
24
0x18
Write request: number of values is invalid
(...99)
0x64
– (Reserved – PROFIBUS)
100
0x65
– (Reserved – Festo: ReqID is not supported)
1)
(...255)
0xFF
– (Reserved – Festo)
1)
These error numbers are not used