Festo Электромотор MTR-DCI User Manual
Page 297
C. The Command Interpreter (CI)
C-23
Festo P.BE-MTR-DCI-DN-EN en 1209a
Controller Type
CI
20E3h
–
Var
uint8
rw
Description
Type of controller.
Values: 0 = without display; 1 = with display.
CI_ReceiveChecksumActive
CI
20F3h
00h
Var
uint8
rw
Description
Enable checksum checking of received CI telegrams, see section C.1.2,
Tab. C/2.
Values:
0 (0x00): disabled (default)
1 (0x01): enabled
Example: deactivate checksum: “=20F300:0012” (12 = checksum)
Password
CI
20FAh
01h, 02h
Array
V-string
rw/ro
Description
For managing the FCT password, entering the super password.
FCT Password 20FAh
01h
V-string
rw
Password for the FCT software
Value:
<........> (fixed: 8 characters, ASCII, 7-bit)
Default:
<00000000> (status upon delivery and after reset)
Super Password 20FAh
02h
V-string
ro
For entering the super password.
Resets all passwords (FCT password and HMI password, object 20FB). Contact
Festo Service if you require the super password.
Local Password
CI
20FBh
00h
Var
V-string
rw
Description
For managing the (local) HMI password to enable particular functions that can
be carried out via the control panel.
Value:
<........> (fixed: 8 characters, ASCII, 7-bit)
Only the first 3 characters are evaluated.
Default:
<
00000000> (status upon delivery and after reset)