Horner APG SmartStack I/O HE800PBS600/HEPBS600 - Manual (Page 77)

MAN0575-04-EN
PAGE 77 of 97
© Horner APG.This drawing is the property of Horner APG. And shall not be disclosed or reproduced except as specifically authorised.
Profibus Modules User Manual
EO 09-0009
CHAPTER 11: FILE, PRINT, EXPORT, EDIT AND VIEW
11.1 File
Open
An existing project can be opened with File > open.
11.2
File Save and Save As
When the file name is known, the configuration can be saved under the File > Save menu, otherwise
the File > Save As menu must be selected.
11.3 File
Close
The current project can be closed with File > Close.
11.4 Print
Once the required printer has been selected in the File > Printer Set-up menu, the configuration can
be printed out under the File > Print menu. For a page view, select the File > Page View menu.
Figure 57: File > Print
The base setting prints information on one sheet only per device.
Topology prints the topology of the bus system.
Bus parameters print the bus parameters of the bus system.
Address table prints the address table of the Master.
Device table prints the device table.
The scope can be given with the Device Selection menu point. The following can be chosen:
All
From Station address to Station address
Selection of a device by means of its description.