Horner APG SmartStack I/O HE800PBS600/HEPBS600 - Manual (Page 22)

Profibus configuration
MAN0575-04-EN
PAGE 22 of 97
© Horner APG.This drawing is the property of Horner APG. And shall not be disclosed or reproduced except as specifically authorised.
Profibus Modules User Manual
EO 09-0009
4.3 Master
In order to insert a (SmartStack) Master into the configuration, choose the Insert > Master menu, this
will open the selection window, or click on the symbol:
Symbol
Insert > Master
Table 2: Symbol Insert > Master
The mouse pointer automatically changes into the Insert Master pointer.
Mouse pointer
Insert Master
Table 3: Mouse pointer insert Master
Click on the position where the Master is to be inserted. The dialog box, from which one or more
Masters can be chosen, opens. The following types of Masters may be selected:
PROFIBUS Combi Master (PROFIBUS-FMS and PROFIBUS-DP) PB
PROFIBUS-DP Master DPM
Table 4: Selectable Master types
Figure 1: Insert > Master
In this window select the required Master by clicking on it in the Available Masters list and then click
the Add button to put the Master to Selected Masters. With OK confirm the selection and the Master
will be insert. This example shows a HE800PBM650-001 that is inserted with the Station address 0
and the Master0. Note for SmartStack masters only COMDPM and COMPB are valid.