Horner APG SmartStack I/O HE-DQM406* (32 Outputs) - Manual

MAN0372-06 10 NOV 2006 PAGE 1
DQM306/406
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
1 SPECIFICATIONS
OUTPUT DQM306 DQM406 DQM306 DQM406
Outputs per Module
16 32
Maximum Inrush Current per
channel 650 mA
Power Commons per
Module 1 2 Minimum Load None
Operating Voltage 10–30 VDC OFF to ON Response 1 ms.
Output Type Sourcing / 10 K PullDown ON to OFF Response 1 ms.
Peak Voltage 28 VDC Max. Output Characteristics Current Sourcing
Maximum Load
Current per channel
0.5 A Max. per output Output Protection Short Circuit
General Specifications
Required Power
(Steady State)
0.12 W (5 mA @ 24 VDC)
Operating
Temperature
0
°–60° Celsius
Required Power (Inrush) Negligible Terminal Type Spring Clamp, Removable
Relative Humidity 5–95% Noncondensing Weight 9 oz. (256 g)
CE
UL
See Compliance Table at http://www.heapg.com/Support/compliance.htm
Digital Outputs
24 VDC Out, Positive Logic
HE800DQM306 (16 Outputs) /
HE-DQM306* (16 Outputs)
HE800DQM406 (32 Outputs) /
HE-DQM406* (32 Outputs)
* HE- denotes plastic case.