Horner APG SmartStack I/O HE-RTD100* - Manual

MAN0236-09 10 NOV 2006 PAGE 1
RTD000/100
This Data Sheet is published individually & also as a part of the SmartStack Supplement (SUP0246-05).
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
This datasheet also covers products starting with IC300.
1 SPECIFICATIONS
RTD000 RTD100 RTD000 RTD100
Number of Channels
2 4
Required Power
(Steady State)
0.10W (4.2mA @ 24VDC)
Required Power
(Inrush)
Negligible RTD Types
100, 200, 500, 1000 Ohms
at 0
°C, Platinum, Alpha
0.00385, DIN43760
Average RTD
Current
0.44mA (100 Ohm Range)
Input Range -200
°C to +850°C I/O Points Required 2 4
Input Impedance
>100Meg Ohm 0-4VDC
Clamped @ 0 and 4VDC
Converter Type Integrating
RTD Excitation Current
2.2, 1.1, 0.44, 0.22mA, 25%
duty cycle
Types Supported DIN43760
Accuracy ± 0.5°C
RTD Short Indefinite
Resolution 0.05
°C
Channel-to-Channel
Tracking
0.1
°C
Update Time 16 channels/second
Operating
Temperature
Relative Humidity
0
° to 60° Celsius
5 to 95% Non-condensing
Input Transient
Protection
Zener/Capacitor Terminal Type Spring Clamp, Removable
Notch Filter
50-60 Hz. Software
Selectable
Weight 9.5 oz. (270 g)
CE
UL
See Compliance Table at http://www.heapg.com/Support/compliance.htm
RTD Input Module
HE800RTD000 / HE800RTD100
HE-RTD000 / HE-RTD100*
* HE- denotes plastic case.