Chapter 10: profibus services – Horner APG SmartStack I/O HE800PBS600/HEPBS600 User Manual
Page 71
CH9: Diagnostics
MAN0575-04-EN
PAGE 71 of 97
© Horner APG.This drawing is the property of Horner APG. And shall not be disclosed or reproduced except as specifically authorised.
Profibus Modules User Manual
EO 09-0009
CHAPTER 10: PROFIBUS SERVICES
10.1
Setting the Slave Address
The desired Slave device must first be chosen with a left mouse click on the symbol of the Slave.
Next set the Station address of a Slave on the PROFIBUS with the Online > Set Slave Address
menu.
Enter the new address into the new station address field. If no further alterations to the Station
address are to be allowed then mark the No additional changing field. If required, enter further
parameters in hexadecimal format in the Remote Slave parameter field. Activate the command with
the Set Address button.
Figure 54: Online > Set Slave Address
Note: The setting of the Station address is only possible for Slaves that support this service.